Steel Panel Corrugated Tile Forming Machine , Roof Sheet Making Machine

Quick Detail:

1.Profile  drawing for corrugated roll forming equipment  

2. Production flow chart for corrugated roll forming equipment

3 speicification

   (1) Material of frame: 250mm H shape steel welding 

   (2)Thinckness of middle plate:12mm

   (3) Step of forming roller : 13steps

  (4) Diameter of shaft (solid shaft): 130mm

 (5) Material of shaft (solid shaft): (high grade) 45# Steel, quenched and tempered treatment,hard chromize coated 0.05-  0.07mm on the surface of the roller.

 (6) Drive type of roll forming machine : drive by chain

 (7) Chain : 25.4 mm (high grade)

 (8) Bearing : 6210 (high grade)

 (9) Reducer : 5# cycloid reducer (high grade)

 (10) Power of main motor : 24KW

 (11) Voltage : 380V/50Hz/3phase

 (12) Line speed : about 9 m/min

 (13) Feeding width : 1000mm

 (14) Suitable coil thickness : accepted thickness for steel coil is 1.2mm-4mm.

 (15) Motor power of hydraulic station : 3kw

 (16) Oil pump of hydraulic station : gear oil pump (high grade)

 (17) Hydraulic cutting: cutting controlled by PLC

 (18) Accuracy of cutting : +/- 2mm

 (19) Razor blades material : Cr12, quenching 58-62 °. 

(20) Appearance size of main forming machine : 6.5m (length)*1.3m (width) *1.5m (height)

(21) Weight of main forming machine : about 4.0T

(22) Electrically controlled system : entire machine controlled by PLC

(23) PLC : DELTA(TAIWAN)

(24) Frequency converter : DELTA(TAIWAN)

(25) Frequency converter power : 3.7KW

(26) Encoder : RUI PU(high grade)

(27) Controlling desktop : text panel screen (high grade)

(28) Electrical parts : DELIXI or CHINT

Machine componets:

(1) Manual un-coiler                                 1 set

(2) Feeding device                                   1 set

 Mr. song

Tel: 86-317-8189769

Contact to this supplier